In order to accommodate several (4 to 6) wirless handheld scanners on our factory floor. I would like to use two or three WRT54GLs running third-party firmware. In that these routers will in in cooled metalic cabinets, I will need locate the antennae outside of the cabinets. Each of these rounters can be easily be hardwired to our network. I assume that each of the routers will external connections for each of the two antennae. Even so, I am absolutely confused as to what to buy. I know that the connectors on the back of the router are R(P)-TNC. The cables would not need to be very long just to connect to the outside of the cabinet. Your advice would be greatly appreciated. Thanks.
Reply
WIFI-LINK
Reply Time
2007-07-03 07:16:31
Contents
You can choose the a href="http://www.wifi-link.com/product.php?action=product&class1_id=1&class2_id=50&class3_id=164&product_id=16">Omni 8dBi antenna 2.4G for both side of your router.
For the cable assembly part you can choose the N male to RP TNC male adapter cable.
If you don.t need to very long cable you can choose the N male to RP TNC male LLC200
Thank you very much
WIFI-Link Group - WIFI-Link Network : Taiwan
(All products are Made In Taiwan)
