I purchased two sets of mast mount kits with my new panel antennas... they have arrived and I am disappointed to see they don.t support the standard 1.5" steel mast diameter. It would be nice if you would put some measurements on your website. I have some spare u-bolts, but they won.t even fit through the holes on the kit, the holes are much too small. Are there any recommendations for a workaround on this?
Also, is there a bracket or something for better attachment of the antenna to the mast mount bracket? I mean, the antenna is held on by two flimsy spring clips, I can.t see them surviving much of a wind load.
Reply
WIFI-LINK
Reply Time
2006-06-07 19:13:08
Contents
Regarding to your question,
The Mounting kit which we are providing will suit for the 1.7"~2.0"
Thank you very much for your suggestion, we will put the U-bolts measurements on our website.
At the moment we do have the products can solve your problem, we provide the Wall Mount for our mounting kit. please check the information from below website.
http://www.wifi-link.com/product.php?action=product&class1_id=13&class2_id=31&class3_id=417&product_id=998
The Panel antenna mounting kit is the only mounting kit we are providing right now, should be no problem with the wind load.
You can mount them directly with our Wall barcket.
Thank you very much.
If you have any other qyuestion please contact us.
WIFI-Link Technologies Inc
WIFI-Link Group - WIFI-Link Network : Taiwan
(All products are Made In Taiwan)
